PEG 10 – Orbital Grinding Machine for Engine Valve Seats for Diameters Ø 20÷65 mm
The PEG 10 is an abrasive-action engine valve grinding machine that works according to a planetary system and which allows the grinding of valve seats with a diameter between Ø 20 and 65 mm.
Its ideal working field is therefore that of medium-sized engines, be they cars or trucks.
DESCRIPTION
PEG 10 acts according to a planetary rotation system that ensures the correct alignment of all the components of the machine, thanks also to the combined effect of the 3 grinding movements:
- Rotating movement
- Orbital movement
- Pendulum movement
The parts that make up the operating unit are assembled with the utmost technical rigor in order to avoid any possible error caused by the coupling between the parts.
The eccentric shaft passing through the motor shaft, is made with a fixed and rectified eccentricity and perfectly coupled with the pilot pin.
Every single component subject to rotation is carefully balanced, in order to avoid axial and radial play during the rotation of the bearings.
The gears with globe screws are housed in the upper part of the machine, which ends with the progress register of the micrometric pass.
The assembly stage of PEG 10 ends with an accurate verification and final testing, to check that the concentricity, balance and symmetry characteristics are respected.
The PEG 10 is sold in 4 different versions based on the accessories that make up the machine’s equipment.
The 4 variants are Standard, Univer, Motor Unit Only and Avio.
TECHNICAL DATA
Working field | Ø 20÷65 mm |
Grinding wheel rotation speed | 11000 Rpm |
Relative motion | 27 Rpm |
Fixed eccentricity | 2,5 mm |
Motor power | 350 W |
Electrical requirements | 230V 1Ph |
Dimensions | 28 × 11 cm |
Weight | 4,6 Kg |
CLICK HERE FOR MORE INFORMATION
STANDARD EQUIPMENT
PEG 10 Standard
- Peg 10 Valve seat grinder
- Grinding wheel dressing tool with diamond
- N° 5 self centering pilots: Ø 5 – 6 – 7 – 8 – 9 mm
- N° 8 silicon carbide grinding wheel 45°: Ø 24 – 26 – 28 – 30 – 33 – 37 – 41 – 46 mm
PEG 10 Univer
- Peg 10 Valve seat grinder
- Grinding wheel dressing tool with diamond
- N° 15 self centering pilots Ø 7 – 8 – 8 short size – 9 – 9 short size – 10 – 11 – 12 mm and Ø 9⁄32“ – 5⁄16“ – 11⁄32“ – 3/8“ – 13/32“ – 7⁄16“ – 1/2“
- N° 9 silicon carbide grinding wheels 45° Ø 26÷63 mm
- N° 9 flat corundum grinding wheels Ø 26÷63 mm
- N° 9 flat silicon carbide grinding wheels Ø 26÷63 mm
- N° 4 silicon carbide grinding wheels 15° Ø 26÷45 mm
PEG 10 Motor Unit Only
- Peg 10 Valve seat grinder
PEG 10 Avio
- Variant for blind holes
OPTIONALS AND ACCESSORIES
Pilots
- SP1500 – Centering pilot Ø 5 mm for PEG 10 and FM1
- SP1550 – Centering pilot Ø 5,5 mm for PEG 10 and FM1
- SP1600 – Centering pilot Ø 6 mm for PEG 10 and FM1
- SP1650 – Centering pilot Ø 6,5 mm for PEG 10 and FM1
- SP1700 – Centering pilot Ø 7 mm for PEG 10 and FM1
- SP1750 – Centering pilot Ø 7,5 mm for PEG 10 and FM1
- SP1800 – Centering pilot Ø 8 mm for PEG 10 and FM1
- SP1801 – Centering pilot Ø 8 mm short for PEG 10 and FM1
- SP1850 – Centering pilot Ø 8,5 mm for PEG 10 and FM1
- SP1900 – Centering pilot Ø 9 mm for PEG 10 and FM1
- SP1901 – Centering pilot Ø 9 mm short for PEG 10 and FM1
- SP1100 – Centering pilot Ø 10 mm for PEG 10 and FM1
- SP1101 – Centering pilot Ø 10 mm short for PEG 10 and FM1
- SP1110 – Centering pilot Ø 11 mm for PEG 10 and FM1
- SP1120 – Centering pilot Ø 12 mm for PEG 10 and FM1
- SP1732 – Centering pilot Ø 7⁄32“ for PEG 10 and FM1
- SP1014 – Centering pilot Ø 1/4“ for PEG 10 and FM1
- SP1932 – Centering pilot Ø 9⁄32“ for PEG 10 and FM1
- SP1516 – Centering pilot Ø 5⁄16“ for PEG 10 and FM1
- SP1132 – Centering pilot Ø 11⁄32“ for PEG 10 and FM1
- SP1038 – Centering pilot Ø 3/8“ for PEG 10 and FM1
- SP1332 – Centering pilot Ø 13⁄32“ for PEG 10 and FM1
- SP1716 – Centering pilot Ø 7⁄16“ for PEG 10 and FM1
- SP1012 – Centering pilot Ø 1/2“ for PEG 10 and FM1
Grinding Wheels
- GW1026 – Flat silicon carbide grinding wheel Ø 26 mm for PEG 10
- GW1028 – Flat silicon carbide grinding wheel Ø 28 mm for PEG 10
- GW1030 – Flat silicon carbide grinding wheel Ø 30 mm for PEG 10
- GW1033 – Flat silicon carbide grinding wheel Ø 33 mm for PEG 10
- GW1037 – Flat silicon carbide grinding wheel Ø 37 mm for PEG 10
- GW1041 – Flat silicon carbide grinding wheel Ø 41 mm for PEG 10
- GW1046 – Flat silicon carbide grinding wheel Ø 46 mm for PEG 10
- GW1052 – Flat silicon carbide grinding wheel Ø 52 mm for PEG 10
- GW1056 – Flat silicon carbide grinding wheel Ø 56 mm for PEG 10
- GW1063 – Flat silicon carbide grinding wheel Ø 63 mm for PEG 10
- WW1026 – Flat silicon white corundum grinding wheel Ø 26 mm for PEG 10
- WW1028 – Flat silicon white corundum grinding wheel Ø 28 mm for PEG 10
- WW1030 – Flat silicon white corundum grinding wheel Ø 30 mm for PEG 10
- WW1033 – Flat silicon white corundum grinding wheel Ø 33 mm for PEG 10
- WW1037 – Flat silicon white corundum grinding wheel Ø 37 mm for PEG 10
- WW1041 – Flat silicon white corundum grinding wheel Ø 41 mm for PEG 10
- WW1046 – Flat silicon white corundum grinding wheel Ø 46 mm for PEG 10
- WW1052 – Flat silicon white corundum grinding wheel Ø 52 mm for PEG 10
- WW1056 – Flat silicon white corundum grinding wheel Ø 56 mm for PEG 10
- WW1063 – Flat silicon white corundum grinding wheel Ø 63 mm for PEG 10
- RW1026 – Flat silicon red corundum grinding wheel Ø 26 mm for PEG 10
- RW1028 – Flat silicon red corundum grinding wheel Ø 28 mm for PEG 10
- RW1030 – Flat silicon red corundum grinding wheel Ø 30 mm for PEG 10
- RW1033 – Flat silicon red corundum grinding wheel Ø 33 mm for PEG 10
- RW1037 – Flat silicon red corundum grinding wheel Ø 37 mm for PEG 10
- RW1041 – Flat silicon red corundum grinding wheel Ø 41 mm for PEG 10
- RW1046 – Flat silicon red corundum grinding wheel Ø 46 mm for PEG 10
- RW1052 – Flat silicon red corundum grinding wheel Ø 52 mm for PEG 10
- RW1056 – Flat silicon red corundum grinding wheel Ø 56 mm for PEG 10
- RW1063 – Flat silicon red corundum grinding wheel Ø 63 mm for PEG 10
- AW1026 – Flat silicon cubitron grinding wheel Ø 26 mm for PEG 10
- AW1028 – Flat silicon cubitron grinding wheel Ø 28 mm for PEG 10
- AW1030 – Flat silicon cubitron grinding wheel Ø 30 mm for PEG 10
- AW1033 – Flat silicon cubitron grinding wheel Ø 33 mm for PEG 10
- AW1037 – Flat silicon cubitron grinding wheel Ø 37 mm for PEG 10
- AW1041 – Flat silicon cubitron grinding wheel Ø 41 mm for PEG 10
- AW1046 – Flat silicon cubitron grinding wheel Ø 46 mm for PEG 10
- AW1052 – Flat silicon cubitron grinding wheel Ø 52 mm for PEG 10
- AW1056 – Flat silicon cubitron grinding wheel Ø 56 mm for PEG 10
- AW1063 – Flat silicon cubitron grinding wheel Ø 63 mm for PEG 10
Dressing Tools
- DT1510 – Grinding wheel dressing unit with diamond for PEG 10
- DD1080 – Dressing diamond for grinding wheel
VIDEO
DOWNLOAD
PEG 10 VALVE SEAT GRINDING MACHINE
PEG CATALOGUE ENG
CLICK HERE FOR A QUOTATION