Kontakt samplelibraries come in two flavours. Those that run in the free Kontakt Player and those that will only work with the full (paid)version of Kontakt. Here we’re going to focus on the latter as thoseare the ones thatyou’re more likely to struggle withloading into Kontakt(the first time at least).
The information presented in this guide is applicable to most third-party Kontakt sample libraries but there are always exceptions so it’s important that you read the user guides that come with the libraries you purchase.
Thisimageis probably one you’re familiar with.It’s the Libraries tab in Kontakt’s browser window. If you can’t see the browser you need to open it by clicking the “Browse” button located at the left of Kontakt’s top menu. The Libraries tab displays all of the Kontakt libraries thathave been installedusingthe “Add Library” button.
Only sample libraries that have been sent by the library’s developer to Native Instruments for encoding show up hereand they work not only in the full version of Kontakt but also in the free Kontakt Player. Most sample libraries you buy from third-party developers, including Xtant Audio, have not been encoded by Native Instruments and therefore won’t appear in thistabnor can they be installed by clicking the “Add Library” button.
To use athird-party library (a library that has not been encoded by Native Instruments) youmustbe usingthe version of Kontakt that the library was created in ornewer– Kontakt is not forwards compatible. Developers almost always state the version of Kontakt required for their librariesand it’s important to check that you have the right one before you make a purchase. At Xtant Audio we try to use Kontakt 4.2 when possible but be sure to check in the “Requirements” section of the product page before you makea purchase, and when in doubt send us an email via the Contact page.
How to check which version of Kontakt you have
The quickest way to check which version of Kontakt you are using is to click on the Kontakt logo at the top left of Kontakt’s window. This will pop up an information box in the middle of the screen which will show the version number you have installed. Just click on the pop-up to close it.
When you purchase a sample library from Xtant Audio, and most other developers, the files you receiveare in a compressed format. This is to speed up the download process. At Xtant Audio we use RAR compressionbecauseit providesthesmallest file size. To access the files inside a RARarchive you need to extract them using one of several freelyavailableutilities– We recommend using the latest version of WinRARon Windows andThe UnarchiveronMac.
Once you’ve installeda RARextracting utilityyou candecompress the archive by right-clicking on it and selecting one of theoptions from the pop-up context menu. The menu layout might be slightly different on your system to the one shown in the image. Another way to access the files inside a RAR archive is to double click onit andit will open uplike a folder, from here you’ll be able to drag the files straight out of the archive.
How to extract multi-part RAR files
Some sample libraries have a very large file size, even when compressed into a RAR archive. To prevent you from having to download onemassive file it is common to split the download into multiple parts, usually about a gigabyte each. To open these multi-part archives you first need to make sure you’ve downloaded every part, if a part is missing the archive cannot be opened. Each part will be numbered and all parts will have the same file size – except for the last part which is often smaller.
Once you’ve confirmed that you have downloaded all the parts you can follow the same procedure used for extracting a single archive – either use the right-click context menu or double click the archive to open it. It is important that you only perform the extraction on the first part of a multi-part RAR archive, this will have “part1” or something similar at the end of its file name. Extracting the first part will automatically extract all the other parts, as long as they are in the same location on your computer.
The extracted sample libraryalways includesone or more Kontakt instrument files (NKIs) andthe audio samples –usually in Kontakt’s lossless compression format (NCW). For mostlibraries therewill alsobe two resource files which usethe NKC and NKR file extensions and are used to store scripts, images, and impulse-responses if any are used by the instrument. Occasionallythere may beother filesor folders as well but the ones mentioned here are the most common.
Onceyou’veextractedthe archiveyou’llnormally have a single folder that contains all of the files needed to use the sample library.With some larger librarieshowever it is commontoreceive the samples in one archive (or multi-part archive) and the instrument files in another. In this situation youneed tocreate a new folderand place the contentsofthe archives inside it (see animation). You canthen delete the RAR archives.
Thefolder can bestored anywhere on your system but it’s a good idea tokeep all of your sample libraries on a dedicated hard-drive, preferably an SSD whichgreatly increasesperformance. Although you canmove this folder to any location on your computer it is important that the files within it are kept together. Removing files from the folder can cause numerous problems with opening the library in Kontakt that can be difficult to fix. In general you shouldrarely need to venture into this folder from your file browser oralter any ofthe files within it – you may occasionallyadd files though if you make changes to one of the library’s instruments in Kontakt and want to save them as a new version.
Although they won’t show up in the Libraries tab there are a number of ways to open third-partyinstruments in Kontakt. The simplest method is to locate the instrument file you want to load using your system’s file browser anddragitonto theopen Kontakt window. This method can be fairly slow if you have a lot of sample libraries or they are organised into several sub-folders, but it’s a good way to quickly audition a new library you’ve just downloaded before findinga permanent home for it.
Anothermethod is toselect “Load” from the file menu at the top of the Kontakt window and then browse for the sample library in the dialog that appears.If you’ve opened the library recently it will also be available for quick access in the “Load recent…” sub-menu.
Files Tab
One of the most common ways to load third-party samplelibraries is to use the Files tab in the Kontakt browser, this is accessible by clicking the Files button just next to the Libraries tab. This provides you with a file browser built into the Kontakt interface where you canselect the instrument you want to load.
This is faster than the previous methods but still relies on moving through a file browserand several folder levels to find the instrumentyou are looking for.
Kontakt’s Quick Load
The quickest method to load third-partyinstruments into Kontakt is the Quick Load cataloguewhich can be accessed by right-clicking in the Kontakt window or by clicking the “Quick” button on Kontakt’s top menu bar. The Quick Load browser opens up at the bottom of the Kontakt window, below any instruments you have open. It’s similar to a file browser but allows you to define an organised folder structure just for Kontakt instruments, banks, and multis. This doesn’t affect the actual folder and files on your hard-drive and will only exist and be accessibleinside Kontakt.
Quick Load browser
The Quick Load browser displays the folders and files in columns. Clicking on a folder in one column will display its sub-folders and files in the column to the right of it. This system allows you to quickly move through the directory structure horizontally from left to right.
Adding folders andinstruments
Right-click in one of the columns to add a folder. Right-clicking on a folder you’ve already created will allow you to delete or rename it. To add Kontakt instruments to a folder just click and drag them from either the Files tab, Libraries tab, Database tab, or your operating system’s filebrowser and onto the Quick Load catalogue.
Loading an instrument
From the Quick Load browser you can right-click on an instrument and select “Load”, double click it, or click and drag it into the main Kontakt window to open it.There aresome other ways to accessyour Quick Load catalogue items but theseare the most straightforward. Please refer to the Kontakt reference manual to find out more about the various methodsof loading instruments into Kontakt.
FAQ
