Distribuidora3hp Error (2024)

FAQs

How do I fix error 3 on my HP printer? ›

Check for obstructions in the carriage path

Open the cartridge access door to get to the carriage inside the printer. Make sure the carriage is not obstructed by gently sliding the carriage side to side. Look for and remove any obstructions in the carriage path, such as crumpled paper or dislodged labels.

Turn the printer off and on then this error message should disappear. If this doesn't work. Turn off the printer and take out the power cable for 30 seconds, remove the printer cable and turn it back on. If this doesn't fix the issue there may be a hardware problem.

Check if the printer is connected to your computer or WI-FI network. Make sure the paper try of your printer is loaded and that the printer has enough ink. If the error still occurs, contact the HP printer support.

(Code 3)” Full error message. “The driver for this device might be corrupted, or your system may be running low on memory or other resources. (

Unplug and restart your printer

Sometimes power cycling your printer can resolve the issue. Turn off your printer and unplug it, wait 30 seconds, plug your printer back in, and then turn the printer back on.

On the printer control panel, touch the Setup or Menu icon. You might need to swipe down on the touchscreen first to open the printer Dashboard. Touch Tools, or Printer Maintenance > Restore. Touch Restore Factory Defaults > Yes or Continue.

The printer might display an error if the printheads are not correctly installed. Make sure the ink tanks are at least half full and paper is loaded in the input tray. Lift the ink access door, and then wait until the carriage stops. Make sure the printhead cover is closed.

How do I update my HP printer driver? ›

In Windows, search for and open Device Manager. In the list of devices, expand the device that you want to update. Right-click the device, and then click Update driver. Click Search automatically for drivers, and then follow the on-screen instructions.

Right-click Start , then select Settings > Bluetooth & devices > Printers & scanners. Find the printer, select it, then select Remove. After removing your printer, add it back by selecting Add device. Wait for your device to find nearby printers, choose the one you want, then select Add device.

An E3 or E4 error indicates a carriage or paper jam. Go to Carriage jam or E3 error or E4 (Paper jam) error for more information.

The E3 error code on an HP printer usually indicates a paper jam or a problem with the paper feed mechanism. To resolve this issue, you can try the following steps: Check for paper jams: Open the printer's paper tray and any access doors to inspect the paper path.

If the printer is in an error state, the conditions that defined this state are reported as one of: 0: Low supply of paper. 1: No paper available. 2: Low supply of toner. 3: No toner available.